South Gujrat Ramadhan Time table.

Samsung SGH-2100/600 Codes.

Samsung SGH-2100/600
Code:
*#06# Displays IMEI
*#9999# Software version
*#0324# Technical menu
*#0523# Lets you adjust the screen contrast
*#0228# Battery status (capacity, voltage, temperature

Sharp and Motorola Codes.

Motorola


Code:

*#06# Displays IMEI
[][][] 119 [] 1 [] OK Enable EFR
[][][] 119 [] 0 [] OK Disable EFR

Sharp Secret Codes

*01763*8371# (*01763*VER0#) — Firmware Version.
*01763*3641# (*01763*ENG1#) — Enable Engineer Mode hold pwr key to leave then disable.
*01763*3640# (*01763*ENG0#) — Disable Engineer Mode.
*01763*8781# (*01763*TST1#) — Test #1 (test early wdt looping to dump, need to remove battery from phone)
*01763*8782# (*01763*TST2#) — Test #2 (test irq dis looping to switch, resets itself)

Nokia Codes.

Nokia
Code:

*#06# IMEI (International Mobile Equipment Identity) information
*#0000# 1st Line: software version. 2nd line: date of software release. 3rd line: phone type
*#746025625# Checks if the SIM clock can be stopped. It is a kind of standby mode that will save battery. However,

the clock automatically gets activated when the phone is switched off and on
*#92702689# Here is a big one! A menu will come up with six choices. First, it’ll display the serial number. Second,

the month and year of manufacture. Third, the date of purchase. Fourth, the last repair date. Fifth, the option to

transfer user data if you have the hardware for it. Sixth, the number of hours the phone has been on. Some of these

dates might not be displayed if the information doesn’t exist
*3370# Enhanced Full Rate (EFR) codec activation
#3370# EFR codec deactivation
*4370# Half Rate codec activation
#4730# Half Rate codec deactivation

EFR gives better voice quality compared to the half rate codec, but can cut down on the battery life. Your phone

will automatically restart after you feed in any of the above codecs

xx# Here is a harmless little one. This will automatically display the number at the ‘xx’ position in your phone book

Sony and SonyEricsson Codes.

Sony

IMEI number: * # 0 6 #
Software version: * # 8 3 7 7 4 6 6 #
Show list of product creator names: + 1 2 0 2 2 2 4 3 1 2 1

SonyEricsson

IMEI number: * # 0 6 #
Software version: > * < < * < *
Default Language: < 0 0 0 0 >
Enter to phone menu without SimCard - after Wrong PIN: press NO: * * 0 4 * 0 0 0 0 * 0 0 0 0 * 0 0 0 0 #
Information about SIMLOCK: < * * <

Code Description
*#06# Display the IMEI (GSM standard)
*#0000# Display the firmware version and date
*#bta0# Display the Bluetooth MAC address (models with build-in Bluetooth radio, activate first to show address)
*#mac0wlan# Display the WLAN MAC address (models with build-in Wi-fi radio)
*#opr0logo# Clear the operator logo (3310 and 3330 only)
*#pca0# Activate the GPRS PCCCH support (early GPRS models)
*#pcd0# Deactivate the GPRS PCCCH support (early GPRS models)
*#res0wallet# Reset the mobile wallet (models with mobile wallet)
*#res0# Soft-format the memory (Symbian models only)
*#rst0# Reset to factory defaults, confirmation required (DCT4 or newer)
*#sim0clock# Display the SIM clock status (DCT3 only)
*#ssn0# Display the manufacturing serial number (mid-range and premium, non-Symbian models, and those devired from them)
*#war0anty# Display the manufacturing and repair info (no exit on DCT3)
*efr0# Enable EFR encoding (pre-2003 models)
#efr0# Disable EFR encoding (pre-2003 models)
*hra0# Enable HR encoding (pre-2003 models)
#hra0# Disable HR encoding (pre-2003 models)
#pw+1234567890+n# Display the SIM lock status: (pre-2003 models)
n = 1: provider lock
n = 2: network lock
n = 3: country lock
n = 4: SIM lock
phannhatnghi is offline Add to phannhatnghi's Reputation Report Post Reply With Quote

Samsung Codes.

Samsung (Most models)

IMEI number: * # 0 6 #
Software version: * # 9 9 9 9 #
Albo* # 0 8 3 7 #
Net Monitor: * # 0 3 2 4 #
Changing LCD contrast: * # 0 5 2 3 #
Memory info: * # 0 3 7 7 #
Albo * # 0 2 4 6 #
Reset CUSTOM memory: * 2 7 6 7 * 2 8 7 8 #
Battery state: * # 9 9 9 8 * 2 2 8 #
Alarm beeper: * # 9 9 9 8 * 2 8 9 #
Vibra test: * # 9 9 9 8 * 8 4 2 #

Samsung (T100 Specific Codes)

Battery status (capacity, voltage, temperature): * # 8 9 9 9 * 2 2 8 #
Program status: * # 8 9 9 9 * 2 4 6 #
Change Alarm Buzzer Frequency: * # 8 9 9 9 * 2 8 9 #
Debug screens: * # 8 9 9 9 * 3 2 4 #
Watchdog: * # 8 9 9 9 * 3 6 4 #
EEPROM Error Stack: * # 8 9 9 9 * 3 7 7 #
Trace Watchdog: * # 8 9 9 9 * 4 2 7 #
Change LCD contrast: * # 8 9 9 9 * 5 2 3 #
Jig detect: * # 8 9 9 9 * 5 4 4 #
Memory status: * # 8 9 9 9 * 6 3 6 #
SIM File Size: * # 8 9 9 9 * 7 4 6 #
SIM Service Table: * # 8 9 9 9 * 7 7 8 #
RTK (Run Time Kernel) errors: * # 8 9 9 9 * 7 8 5 #
Run, Last UP, Last DOWN: * # 8 9 9 9 * 7 8 6 #
Software Version: * # 8 9 9 9 * 8 3 7 #
Test Vibrator: * # 8 9 9 9 * 8 4 2 #
Vocoder Reg: * # 8 9 9 9 * 8 6 2 #
Diag: * # 8 9 9 9 * 8 7 2 #
Reset On Fatal Error: * # 8 9 9 9 * 9 4 7 #
Last/Chk: * # 8 9 9 9 * 9 9 9 #9 9 * 9 9 9 #

Siemens, Sagem and Philips Codes.

Philips
IMEI number: * # 0 6 #
Simlock info: * # 8 3 7 7 #
Security code: * # 1 2 3 4 # (Fizz) or * # 7 4 8 9 #

Sagem
IMEI number: * # 0 6 #
Service Menu access: MENU 5 1 1 #

Siemens

IMEI number: * # 0 6 #
Software version: Take out SIM & enter: * # 0 6 # (& press LONG KEY)
Bonus screen: in phone book: + 1 2 0 2 2 2 4 3 1 2 1
Net Monitor (S4 Power):
Menu 9 8, left SoftKey, 7 6 8 4 6 6 6, Read phone, Menu 5 6.